Home > Soldering Stations & Tips > PACE Soldering > Pace Conductive Rework Stations >

MBT 350 3-Channel 120V Digital Rework & Repair System
PACE MBT 350 3-Channel Digital Rework & Repair System
 
Our Price: $1,520.26

Product Code: 8007-0454
Qty:

Description
 

PACE's MBT 350 is a self contained, 3 channel rework station that offers high capacity, low temperature SMT/Thru-Hole soldering, desoldering and repair. The unit features three individually powered and controlled handpiece channels, providing the capability to run 3 different IntelliHeat handpieces simultaneously, and also features a crystal clear Digital LCD Screen which displays the temperatures of all 3 handpiece channels, in real time! The easy to read LCD control panel is uncomplicated with added features such as temperature set back and password protection.

The TD-100 Ergonomic Soldering Iron uses a patented Tip-Heater Cartridge which can be changed in seconds without tools, and most tips heat up within 10 seconds flat! Performance/responsiveness is exceptional, perfect for the most demanding Lead-Free or multilayer soldering. Yet it can also handle the most delicate flexible printed circuits. Over 100 soldering tip geometries are available as well as over 30 surface mount removal tips. To really protect your Tip-Heater Cartridges and fine point tips from oxidation, the TD-100 can be used with PACE's Instant-Setback Cubby. The cubby automatically drops the tip temperature to 176°C (350°F) if it is in the cubby for more than 45 seconds, which maximizes the life of your tips! Up to two Instant-Setback Cubbies can be connected to the MBT 350.

Ideal for both through-hole and surface mount desoldering, the clog-free SX-100 is the best performing solder extraction tool on the market today. The handpiece can be used with a disposable Sodr/Flux-Trap paper solder collection chamber or re-cleanable Glass Chamber. When the filter is full, just pull out the chamber, pop out the old filter and replace with a new one - all within 15 seconds!

Finally, the MT-100 MiniTweez High Capacity Micro Tweezer is perfect for one-handed removal of chips (including 0201's), SOIC's and other surface mounted devices. Like the TD-100, the MT-100 uses Tip-Heater Cartridges which can be changed in seconds without tools, and most tips heat up within 10 seconds.

The MBT-350 includes TD-100 ThermoDrive Soldering Iron, SX-100 Sodr-X-Tractor Desoldering Handpiece and MT-100 MiniTweez Handpiece (IntelliHeat versions) along with associated Tip & Tool Stands. Tips sold separately.

More Information
  • Power Requirements: 120 VAC, 60Hz (240 watts maximum) & 230VAC, 50Hz (240 wats Maximum)
  • Handpiece Compatibility: IntelliHeat
  • Tip to Ground Resistance: <2ohms
  • Temperature Stability: +/- 1.1C (2F)
  • Temperature Accuracy: Meets or exceeds ANSI-J-Std-001
  • Set Temp Range: Tip Heater Cartridge Compatible Handpieces = 205° to 454°C (400° to 850°F) Nominal, SensaTemp Compatible Handpieces = 37°C to 482°C (100° to 900°F) Nominal
  • Vacuum Rise Time: 150ms Average as measured with PACE Process Monitor
  • Vacuum: 20in Hg max
  • Pressure: 18psi max
  • Air Flow: 8 SLPM max


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Soldering Stations & Tips > PACE Soldering > Pace Conductive Rework Stations