Home > Soldering Stations & Tips > PACE Soldering > Pace Hot Air Rework Stations >

ST 325 115V Convective Rework System
PACE ST 325 Convective Rework System
Our Price: $1,579.12

Product Code: 8007-0429


The ST 325 is a digital, self-contained system that is fully programmable and can be used to remove or install surface mount components when individual or multiple operations are to be run. From the front panel, the system can be used in either manual or "timed" modes. Manual mode means that the system generates heated airflow when the cycle button is pressed; when it is pressed a second time the system shuts off. "Timed" modes allow the operator to create up to 20 "Profiles" that consist of time and temperatures parameters to ensure process control and repeatability. Both cycle start and vacuum functions are activated with conveniently located switches on the handpiece.

The ST 325 comes standard with one K-type thermo-couple input that can be used to monitor the thermal environment at the work site with optional software. The system also comes with the Lo-Flo pump and the vacuum wand (PV-65) for manipulating components manually. The heavy-duty, durable metal housing ensures years of service and the sloped face of the front panel is a standard feature for ease of use. Other ST systems can be stacked on to the ST 325 to preserve bench space. The capabilities of the ST 325 can be used to remove or install just about any type of standard pitch surface mount component when coupled with the ST 500, ST 525, or ST 550.

When additional programming capability is required, such as 4 zone profile creation, an optional software package is available that can be used with a PC or laptop (1199-0019-P1). The optional software package further allows the ST 325 to control the ST 450 Preheater when bottom side heating of the PCB is required. Once the 4 zone profiles have been created with the software, they can be downloaded to the ST 325 and can be run WITHOUT the PC or laptop being connected!

The system can install standard BGA packages when fitted with the ST 500, ST 525 or ST 550, ST 450 or ST 400, and the optional PC or laptop software. Area array components are aligned using a proven, reliable template method that is easy to use.

Patented, Adjustable, Spring Loaded Vacuum Pik The handpiece is fitted with an adjustable, spring loaded vacuum pik to lift components from the PCB and to hold the component in the nozzle during alignment. The "give" in the spring loading is set, but the absolute position of the vacuum pik is adjustable over a 1.5" length. Tips sold separately.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Soldering Stations & Tips > PACE Soldering > Pace Hot Air Rework Stations